Section 3
SPECIFICATIONS
25
3.1 TABLE OF SPECIFICATIONS
LS25-150 SERIES 60 Hz DIMENSIONS
MODEL HP CAPACITY LENGTH WIDTH HEIGHT(I) WEIGHT
ACFM IN IN IN LB
(without/with encl.) (without/with encl.)
150L 150 730 96 62 66/68 5810/6600 (AC) (II)
150H 150 690 96 62 66/68 5810/6600 (AC) (II)
200HH 200 708 96 62 66/68 5810/6600 (AC) (II)
200XH 200 694 96 62 66/68 5810/6600 (AC) (II)
NOTE: Noise levels vary with machine and enclosure. For machine dBA output, consult factory with
machine serial number.
COMPRESSOR: STANDARD MODELS 24KT MODELS
Type: Rotary Screw Rotary Screw
Standard Operating 150 HP
Pressure (60Hz): 100 psig (6.9 bar) - “L” Model 100 psig (6.9 bar) - “L” Model
125 psig (8.6 bar) - “H” Model 125 psig (8.6 bar) - “H” Model
Standard Operating 200 HP
Pressure (60Hz): 150 psig (10.3 bar) - ”HH” Model 150 psig (10.3 bar) - “HH” Model
175 psig (12 bar) - “XH” Model 175 psig (12 bar) - “XH” Model
Bearing Type: Anti-Friction Anti-Friction
Ambient Temperature (Max.) (III): 105°F (40°C) 105°F (40°C)
Cooling: Pressurized Fluid Pressurized Fluid
Compressor Fluid: Sullube 24KT Fluid
Sump Capacity: 9 U.S. gallons (34 liters) 9 U.S. gallons (34 liters)
System Fluid Capacity 14 U.S. gallons (53 liters) 14 U.S. gallons (53 liters)
Optional Control: Electro-Mechanical Electro-Mechanical
Standard Control: Supervisor with Deluxe Supervisor with Deluxe
Sequencing Sequencing
MOTOR: (60 Cycle Compressors)
Size: 150 & 200HP - 460V
Type: Open Dripproof, Three Phase, 60 Cycles
40°C Maximum Ambient Temperature,
Options Available: Other Voltages
TEFC also Available
Speed: 1780 RPM
(I) An additional height of 25 inches is required to service the separator elements.
(II) For water-cooled machines, subtract 100 lbs.
(III) Special compressors are available for operation in higher ambient temperatures.
To Next Page
Loading...
