Section 8
ILLUSTRATIONS AND PARTS LIST
73
8.11 DISCHARGE SYSTEM- WATER-COOLED
key part
number description number quantity
1 cooler, after (water) 043009 1
2 elbow, tube-M 90° 2” x 2” 810532-200 1
3 tube, MPV to cooler 02250123-909 1
4 connector, tube-M 2” x 2” 810232-200 1
5 valve, minimum pressure/check (I) 242405 1
6 bushing, reducing hex 1/2” x 1/8” 802102-005 1
7 nipple, pipe 2” x 10” 822132-100 1
8 nipple, pipe 2” x close 822232-000 8
9 cross, pipe 2” 801315-080 1
10 bushing, reducing hex 2” x 1/2” 802108-020 2
11 nipple, pipe 1/2” x close 823208-000 1
12 valve, blowdown 1/2” 02250100-042 1
13 silencer, air 1/2” 041006 1
14 connector, flex 1/4”T x 1/4”P 020169 1
15 support, oil return 02250128-598 1
16 connector, tube male bulkhead 1/4” 02250101-490 1
17 connector, tube 1/4” x 7/16” 811804-044 1
18 filter, assembly (II) 02250117-782 2
19 glass, sight 02250126-129 2
20 orifice, plug brass 1/8” x 1/16” 02250125-775 1
21 orifice, plug brass 1/8” x 1/32” 02250125-774 1
22 tee, male pipe 1/4” 869825-025 1
23 elbow, pipe 90° M/F 1/4” x 1/4” 860704-025 1
24 elbow, tube-F 1/4” x 1/4” 812304-025 1
25 element, separator secondary (III) 02250047-808 1
26 element, separator primary (IV) 250034-085 1
27 tank, oil sump vertical 02250114-579 1
28 plug, O-ring 040029 1
29 plug, sight glass 1 7/8” 02250097-611 1
30 nipple, pipe 1/2” x 3” 822108-030 1
31 valve, ball 1/2” 047117 1
32 connector, tube straight 1/2” 250024-695 2
33 tubing, 1/2” thermoplastic 250030-855 2
34 bulkhead, pipe 1/2” 841500-008 2
(Continued on page 75)
(I) For maintenance of minimum pressure/check valve no. 242405, order repair kit no. 001176.
(II) For maintenance on filter assembly no. 02250117-782, order repair kit 02250117-782.
(III) For maintenance on secondary separator element no. 02250047-808, order repair kit
no. 02250048-734.
(IV) For maintenance on primary separator element no. 250034-085, order repair kit no. 250034-085.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
