Sullair LS-25 - Page 87

Section 8
ILLUSTRATIONS AND PARTS LIST
81
8.13 ACTUATOR VALVE
key part
number description number quantity
1 pin, roll 1/8” x 1/2” 827402-050 1
2 shaft 250030-979 1
3 O-ring, viton 3 1/4” x 1/8” 826502-236 1
4 bearing 499002-207 1
5 seal, lip 02250123-809 1
6 base, air cylinder 250016-725 1
7 screw, actuator adjustment 02250094-568 1
8 nut, hex 1/2”-13 824208-448 1
9 capscrew, ferry 1/2”-13 x 2 3/4” 828408-275 3
10 washer, reg #8 838201-045 6
11 screw, machine rd hd #8-32 x 1/2” 831601-050 6
12 decal, valve position 250029-784 1
13 pin, roll 1/4” x 1” 827404-100 1
14 capscrew, hex GR8 1/4”-20 x 1/2” 828204-050 4
15 indicator, actuator 250030-983 1
16 gear 250016-196 1
17 guide, rack actuator 250016-199 1
18 mount, air cylinder 250027-169 1
19 capscrew, ferry 5/16”-18 x 3/4” 828405-075 3
20 spring 250029-297 1
21 screw, machine hex 1/4”-20 x 1 3/4” 830104-175 1
22 nut, hex jam RH 1/4”-20 824904-164 1
23 rack, gear 250016-197 1
24 nut, hex jam RH 3/8”-16 824906-227 1
25 shaft, air cylinder 250016-194 1
26 cylinder, air 250016-183 1
27 capscrew, socket hd nylok 3/8”-16 x 1” 828906-100 1
28 orifice, socket hd nylok 3/8”-16 x 1” 028831 1
29 decal, warning actuator 250029-836 1
30 decal, actuator valve positioning 250029-7841 1
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR