Section 12
ILLUSTRATIONS AND PARTS LIST
107
12.14 SUMP AND PARTS
key part
number description number quantity
1 connector, flex 1/4t x 1/4p 020169 2
2 valve, relief 200# 02250097-349 1
3 plug, sight glass 1-7/8” sae 02250097-611 2
4 valve, ball 3/4”sae-m x 1/2”npt-f 02250098-303 1
5 separator, air/oil primary ls-12/16 (I) 02250100-753 1
6 separator, air/oil secondary ls-12/16 (I) 02250100-754 1
7 connector, tube male bhd 1/4 x sae 02250101-490 1
8 adapter, sae 2-1/2-12 x 2-1/2-12 02250110-661 1
9 filter, asembly genisis filter 02250117-782 2
10 orifice, plug brass 1/8”npt x 1/32” 02250125-774 1
11 orifice, plug brass 1/8”npt x 1/16” 02250125-775 1
12 tank, air/oil separator 02250125-995 1
13 sightglass, orf block sae 02250126-129 2
14 valve, min pressure 2-1/2”-sae (II) 02250129-374 1
15 connector, tube 1/2tube x 1/2npt 02250134-500 1
16 insert, nyl tbg 1/2 od x .062 w 02250134-503 2
17 elbow, tube-m 1/2” compr 02250134-504 1
18 tube, nylon 1/2” o.d. 02250134-505 1
19 support, sight glass 02250134-697 1
20 plug, o-ring boss sae 1 1/4 040029 1
21 connector, tube-f 1/4” swglk ss 250139-044 1
22 elbow, tube-m 1/4” swglk ss 250211-005 1
23 plug, pipe 1/2” 3000# stl 807800-020 1
24 capscr, hex gr5 1/4-20 x 1/2 829104-050 1
25 capscr, hex gr5 7/16-14 x 2 829107-200 8
26 capscr, hex gr5 1/2-13 x 1 1/2 829108-150 4
27 washer, spr lock reg pltd 1/2 837808-125 4
28 washer, spr lock reg pltd 5/8 837810-156 8
29 washer, pl-b reg pltd 1/2 838208-112 4
30 tubing, stnls stl 1/4” 20 ga 841215-004 6
(Continued on page 109)
(I) For maintenance on separator, order primary replacment element no. 02250100-755, and secondary
replacement element no. 02250100-756.
(II) For maintenance on minimum pressure valve no. 02250129-374, order repair kit no. 250018-456.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
