Section 5
SUPERVISOR CONTROLLER
27
loaded.
Run Hours - Hours machine was running loaded
and unloaded.
Load Cycles - Number of load/unload cycles.
Starts - Number of machine starts.
Capacity - Maximum capacity of machine.
VFD - N/Y Indicates if program is configured for
VFD motor control.
Com Module - Yes/No Enables or disables the
communication module if installed.
Mtr Module - Yes/No Enables or disables the
motor actuator module if installed.
5.11 TEST- Used by Sullair personnel for troubleshoot-
ing of serial communications.
To Next Page
Loading...
