Sullair SUPERVISOR CONTROLLER Instruction Manual

Section 6
CONTROLLER COMMUNICATION
PROTOCOL
31
22- Parameters are identified by parameter number over serial communications, as
shown in Table 6.3 below. Parameters for Supervisor II Deluxe and WS Controllers
are as noted the in second and fourth columns. Text parameters 61-69 are not
available through the external bus. Items are marked R for read and RW for read-
write.
23- Sequence time in hours, 1 to 6 digits.

Sullair SUPERVISOR CONTROLLER Specifications

General

Brand	Sullair
Model	SUPERVISOR CONTROLLER
Category	Controller
Language	English