Sullair Supervisor - Table of Contents

TABLE OF CONTENTS
PAGE
Section 1
SAFETY AND INTRODUCTION
1 1.1 SAFETY
1 1.2 SUPERVISOR CONTROLLERS
1 1.3 SEQUENCED COMPRESSOR SYSTEMS
Section 2
SEQUENCING WITH MULTIPLE SUPERVISOR CONTROLLERS
3 2.1 NORMAL OPERATION
3 2.2 COMPRESSOR SYSTEM
4 2.3 CONTROLS WIRING
4 2.4 MACHINE PREPARATION PRIOR TO
SEQUENCING
4 2.5 SYSTEM OPERATION
5 2.6 SYSTEM SETUP AND TUNING
6 2.7 CHANGING SEQUENCE PARAMETERS
6 2.7.1 FOR SUPERVISOR
7 2.7.2 FOR SUPERVISOR II DELUXE
8 2.8 SYSTEM DISPLAY- SUPERVISOR
8 2.9 SYSTEM DISPLAY- SUPERVISOR II DELUXE
9 2.10 REMOVING A MACHINE FROM SEQUENCE
FOR MAINTENANCE
9 2.11 CALIBRATION OF P2 PRESSURE
TRANSDUCERS- SUPERVISOR
10 2.12 CALIBRATION OF P2 PRESSURE
TRANSDUCERS- SUPERVISOR II DELUXE
10 2.13 FULL LOAD FEATURE
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL
Continued...