29
Section 6
SUPERVISOR PROTOCOL
Parameter Supervisor Supervisor Description Digits Units
II Controller
56 * Maintenance separator nnnnn hour
57 * Maintenance air filter nnnnn hour
58 * Maintenance oil nnnnn hour
59 * Maintenance oil analysis nnnnn hour
70 * * Parameter protection n y/n
71 * * Shutdown on warning n y/n
80 * Load cycles (read only) nnnnnn
81 * Number of starts (read only) nnnnnn
98 * Run hours (read only) nnnnnn hour
99 * Load hours (read only) nnnnnn hour
23- Sequence hours, 1 to 6 digits.
To Next Page
Loading...
