SummaCut D60-D120 Service Manual
The Menu key is used to reach the most common menu items of the cutter quickly. A
last menu item in the row gives access to a submenu with which all the other functions
of the cutter can be reached (see section 1.3). The various menu items are illustrated
in the figure below.
Menu differ according to the selected tool
(1) If the PEN is the default tool
(2) If the KNIFE is the default tool
(3) If the POUNCER is the default tool
MAIN MENU SUMMACUT D60 AND THE D120
1-2 Keyboardcontrols
To Next Page
Loading...
