Summa SummaCut D60 - Overview of the Service Manual; Manual Overview; Manual Organization

INTRODUCTION
1. OVERVIEW
This is the Summa Service Manual for the SummaCut D60 and D120 cutters. It
provides information for servicing the cutters. All repairs are to be made by, or under
the direction of, authorised Summa service personnel.
This manual is copyrighted by Summa 1999. Summa reserves the right to change any
information contained in this manual without prior notice. Unauthorised copying,
modification, distribution, or display is prohibited. All rights reserved.
2. MANUAL ORGANIZATION
This manual is divided into the following sections:
 Table of Contents
 Introduction
 Keyboard controls
 General replacement guidelines
 Maintenance
 Calibration
 Troubleshooting
 List recommended spare parts with pictures
Keyboard control contains the following:
INTRODUCTION I-1