Summa SummaCut D120 - User Manual

User’s Manual
Rev 002

Summary

Setup

1.1 Unpacking the Cutter

Instructions for safely removing the SummaCut cutter from its packaging and preparing for setup.

1.2 SummaCut Cutter Components

Identifies and describes the key parts of the SummaCut cutter as viewed from the front and back.

1.3 Connecting the Cutter to the Mains

Details on how to safely connect the SummaCut cutter to a power source, including grounding and voltage.

1.4 Connecting the Cutter to a Computer

Guides on establishing communication between the SummaCut cutter and a computer via USB or RS-232.

1.5 Loading Media

Procedures for correctly loading various types of media, including pinch roller positioning and media feed.

1.6 Tool Installation

Instructions for installing and setting up cutting tools such as knives and pens for operation.

Basic Operation

2.1 LCD AND CONTROL PANEL

Overview of the cutter's liquid crystal display and control panel functions for user interaction.

2.2 How to Set Tool Parameters

Guide to adjusting parameters like tool type, pressure, and knife offset for optimal cutting performance.

2.3 How to Set Cutting Speed

Instructions on adjusting the cutting speed and velocity parameters to suit different media and jobs.

2.4 How to Change the User (Quick Parameter Change)

Explains how to switch between different user configurations for quick parameter adjustments.

2.5 How to Make Sure the Sign Has the Correct Size (Length Calibration)

Details the process of media length calibration to ensure accurate cutting dimensions.

OPOS (Optical POSitioning)

3.1 Introduction

Introduction to the Optical POSitioning System (OPOS) for accurate contour cutting.

3.2 Basic OPOS Operation

Outlines the fundamental steps involved in using the OPOS system for contour cutting.

3.3 Detailed OPOS Operation

In-depth guide on using OPOS, including creating graphics, setting parameters, and registering markers.

3.4 Automating Tasks with OPOS

Describes how OPOS can automate tasks like cutting multiple copies or jobs using barcodes.

3.5 Cutting Through

Instructions on using the "Cutting Through" functionality for specific cutting tasks.

Detailed Operation

4.1 Introduction

Overview of parameters and tests accessible from the control panel.

4.2 Main Menu

Explains the structure and options available within the cutter's main operational menu.

4.3 System Setup Menu

Detailed list and explanation of all available settings and tests within the system setup menu.

Maintenance and Cleaning

5.1 Introduction

General guidance on maintaining the SummaCut cutter and keeping it clean.

5.1.1 Cleaning the drive system

Procedures for cleaning the drive system to ensure optimal media traction and performance.

5.1.2 Cleaning the media sensor

Instructions on cleaning the media sensor to prevent malfunctions.

5.1.3 Cleaning the Y-Guide Rail

Steps for cleaning the Y-guide rail and sliding surfaces for smooth tool carriage movement.

5.1.4 Changing the fuse

Guide on how to safely replace the fuse in the power entry module.

Specs and Genaral Information

6.1 Features List

A comprehensive list of the SummaCut cutter's hardware, interface, and software features.

6.2 CUTTER ACCESSORIES AND CONSUMABLES

Lists available accessories and consumables for the SummaCut cutter, including part numbers.

6.3 Technical Specification

Provides detailed technical specifications for the SummaCut cutter, including dimensions and performance.

6.4 Cutter accessories and consumables

Further details on accessories and consumables, often with part numbers and pictures.

Summa SummaCut D120 Specifications

General

Cutting Width	1200 mm
Connectivity	USB
Compatibility	Windows
Contour cutting	Yes
Interface	USB
Power Requirements	100-240 V, 50/60 Hz
Max. material width	1270 mm
Maximum Media Width	1270 mm