Summa SummaCut D120 - Cal. OPOS; OPOS Settings; OPOS Sensor

SummaCut cutter User’s Manual
Detailed Operation 4-13
4.3.26 Cal. OPOS
This test calibrates the physical distance between the OPOS sensor and the knife tip.
It is explained in section
3.2.1
4.3.27 OPOS Settings
The OPOS settings sub-menu is used to change the different OPOS parameters with
the control panel. It is explained in section
3.3.5
4.3.28 OPOS Sensor
This submenu is to test the reflection value of OPOS. Press
for readout.