Need help?Do you have a question about the Summa DC5 and is the answer not in the manual?
Step-by-step guide for safely removing the printer from its packaging and pallet.
Identifies and explains the key physical parts of the DC5(sx) printer, viewed from the front.
Covers essential safety guidelines, ideal operating conditions, and proper electrical connection procedures.
Instructions on how to safely turn on the DC5(sx) printer and its initialization process.
Details on establishing a connection between the DC5(sx) and a PC via USB or Ethernet.
Procedures for loading, unloading, and managing media rolls on the DC5(sx) printer.
Guide on how to load and remove ribbon cassettes for printing operations.
Instructions for safely removing and installing the cutting knife holder on the DC5(sx).
Explains the functions and navigation of the DC5(sx) printer's touch screen control panel.
Guide on adjusting print density levels for optimal transfer and print quality.
How to set up and calibrate media tracking for accurate print positioning and alignment.
Instructions for setting crucial knife parameters like pressure and offset for precise cutting.
Procedure to align print and cut origins for accurate contour cutting.
How to adjust the printer for different media widths, including pinch roller positioning.
Steps to ensure consistent media path for extended printing jobs.
Guides on setting up designs and performing contour cuts, including OPOS cutting.
How to configure parameters for cutting through media, creating 'bridges' for material integrity.
Overview of parameters and tests accessible via the touch screen for detailed printer operation.
Comprehensive guide to printer-specific settings including density, alignment, and cleaning.
Detailed configuration options for the cutting head, including pressure, velocity, and overcut.
Access to less frequently used parameters like take-up roll, ribbon save, and unit settings.
Configuration options for network (Ethernet) and USB communication with the printer.
Steps for properly shutting down the DC5(sx) to minimize wear.
Information on performing a reset operation on the DC5(sx) printer.
How to print pre-installed demo files for testing or demonstration purposes.
General advice on keeping the DC5(sx) clean and maintaining its performance.
Detailed procedures for cleaning drive systems, media sensors, printheads, and the printing surface.
Guide on how to replace the printhead cleaning pad when it wears out.
Manual cleaning process for the printhead to ensure optimal print quality.
Specific instructions for carefully cleaning the delicate printing surface if necessary.
Information on the printer's operating voltage and how to safely replace the fuse.
Overview of PC software, system requirements, and initial installation steps.
Explores the menus and functionalities of the Summa Printer Control software.
Details on using Summa Color Control for RIP, color management, and job setup.
Instructions on accessing printer functions via the built-in webserver using a web browser.
Lists the key hardware, interface, and functionality features of the DC5(sx) printer.
Specifies the necessary PC system requirements for operating the DC5(sx) software.
General| Technology | Thermal Transfer |
|---|---|
| Print resolution | 300 dpi |
| Connectivity | Ethernet, USB |
| Supported Media | Paper |
| Application | Labels |
To Next Page
