Summa SummaCut D120 - Combined Contour Cut and Cutting through

SummaCut cutter User’s Manual
Contour Cutting 3-21
14. Press or to choose the Panel-parameter that needs to be changed.
The menu can scroll through from on or off, panels size, recut and sorting.
15. Press
or to change the value of the chosen parameter.
The value will change on the LCD.
16. Press
to confirm.
An asterisk will appear before the value, indicating it is now the selected setting.
Note: Recommended settings are: Panels: ON; Panel size: 3-10cm; recut: OFF
sorting: ON.
17. Press
twice.
FIG 3-4
3-5 COMBINED CONTOUR CUT AND CUTTING THROUGH