Sun Microsystems Sun Fire X4150 - Page 110

94 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
Tip – To reduce the length of commands, navigate to the target first using the cd
command.
-> cd /SP/AgentInfo/SNMP/users/albert
-> set PrivacyProtocol=DES
-> set PrivacyPassword=password AuthProtocol=SHA AuthPassword=
password
Note – You can change SNMP user permissions without resetting the privacy and
authentication properties.
To show an SNMP user’s properties, Enter this command:
-> show
The result appears as follows:
/SP/AgentInfo/SNMP/users/sicilian
Targets:
Properties:
Permission = ro
AuthProtocol = MD5
AuthPassword = (Cannot show property)
PrivacyProtocol = none
PrivacyPassword = (Cannot show property)
Target Commands:
show
set
/SP/AgentInfo/SNMP/users/sicilian ->