Sun Microsystems Sun Fire X4150 - Resetting Passwords and Clearing CMOS NVRAM

76 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
■ Administrator – Enables read and write access to all ELOM software features,
functions, and commands.
■ Operator – Enables limited access to SP software features, functions, and
commands. Operators cannot change their assigned roles.
■ User – Enables a user to access the system without being able to add, modify, or
delete accounts.
■ Callback – Enables access to commands that set up the callback feature.
The syntax is:
set username Permission=[administrator|operator|user]
Adding a User Account Using the CLI
▼ To Add a User Account Using the CLI
● Enter the following command:
create /SP/users/username
You are prompted for a password.
The username must be 4-20 characters long, and passwords must be a minimum
of eight characters long.
To Delete a User Account Using the CLI
● Enter the following command:
delete /SP/users/username
▼ To Display User Accounts Using the CLI
● Enter the following command:
show /SP/users