Sun Microsystems Sun Fire X4150 - Sun Fire X4150 Server Front Panel Features

2 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
Sun Fire X4150 server ELOM Features
The ELOM provides a dedicated system of hardware and supporting software that
enables you to manage your server independent of an operating system, and in low-
power situations. ELOM is composed of four components:
■ Web-based interface (requires JavaR v5 or later)
■ Command-line Interface (accessed via serial or ethernet using ssh)
■ IPMI v2
■ SNMP v3
You can access the ELOM using a web browser, secure shell (SSH), or via the Sun
Fire X4150 server’s serial port. Your server’s default network setting is configured as
DHCP for easy access via a web browser or SSH, and the ELOM output is directed
by default to the serial port.
Embedded Lights Out Manager
Common Tasks
The following table shows common tasks and the management interfaces used to
perform each task.
TABLE 1-1 ELOM Common Tasks
Task IPMI
Web-
Based
Interface CLI SNMP
Redirect the system graphical console to a remote client
web browser.
-Yes - -
Connect a remote diskette drive to the system as a
virtual diskette drive.
-Yes - -
Connect a remote CD-ROM drive to the system as a
virtual CD-ROM drive.
-Yes - -
Monitor system fans, temperatures, and voltages
remotely.
Yes Yes Yes Yes
Monitor system BIOS messages remotely. Yes Yes Yes -
Monitor system operating system messages remotely. Yes Yes Yes -