38 Sun Fire X4150 Server Product Notes • February 2010
▼ Selecting the Web Interface Time-out Duration
It is best to select the web interface time-out duration when performing remote
installations. To choose the web interface time-out duration:
1. Login to the ILOM web interface.
2. Click the System Information Tab and click the Session Time-out Tab.
3. Set timeout to be 15 minutes, 30 minutes, 1 hour, or 3 hours.
4. Click apply.
▼ Selecting Mouse Mode Settings According to Host OS
You need to select the correct mouse mode corresponding to the host OS in order for
your local mouse to manage the host remotely via the ILOM web interface.
1. Select the appropriate mouse mode:
■ Select Absolute mouse mode if your host is running Windows OS or Solaris.
■ Select Relative mouse mode for Linux OS.
2. Reset the SP to apply this change.
Switch Control Between Local Mouse and Host Mouse
In order to switch control between local mouse and host mouse, you can press
“Alt +m”.
Diagnostics Issues
The following topics are contained in this section:
■ “SunVTS Issues” on page 38
■ “Pc-Check Issues” on page 39
SunVTS Issues
The following issue applies to SunVTS diagnostics software.
To Next Page
Loading...
