SunStar KM-506 Series - Motor and Automation Device Specifications

9
UsageModelName
5) Peripheral Automation Devices (Optional)
󳢯S =servo motor
󳢯E =470 motor
Auto Knee Lifting System
Production Counter
Material Edge Sensor
Standing Pedal
SCOUN-1
SEDG-1
SEDG-2
SPDL-1
SPDL-2
A counting device, which indicates the completed quantity on the
program unit panel, including added, subtracted, corrected or
remaining quantity along with other performance rates.
A device that senses the edge or thickness of the sewing material to
stop the machine without manual pedaling. Available in two types:
SEDG-1 for edge sensing type and SEDG-2 for thickness sensing type.
A device needed when only one operator runs several sewing
machines. Pedals for acceleration, thread trimming, presser foot
and ascending are built separately. Two types, SPDL-1 and
EDPL-1 for fixed speed type and SPDL-2 and EDPL-2 for
adjustable speed type are available.
SPF-5
A device that operates with a solenoid by lifting the presser foot
automatically at pedal reverse gear 1.
3) 470 Motor
MODEL
PM470
PHASE
1 : 1 󳤡
1 : 1 󳤡
3 : 3 󳤡
3 : 3 󳤡
1 : 1 󳤡
3 : 3 󳤡
HERTZ
5 : 50Hz
6 : 60Hz
5 : 50Hz
6 : 60Hz
5 : 50Hz
6 : 60Hz
5 : 50Hz
6 : 60Hz
5 : 50Hz
6 : 60Hz
VOLT
1 : 110V
2 : 220V
3 : 380V
4 : 110V / 220V
5 : 220V / 380V
PM470
PC470
4) 470 Motor Controller
MODEL
PC470
VOLT
1 : 110V
2 : 220V
MODEL
A
SUB CLASS
001
Keystone Sewing Machine Company, Inc.