EasyManua.ls Logo

SunStar KM-560 - Oil Supply

SunStar KM-560
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Caution
Be sure to plug in after finishing oil supply.
If the user steps on the pedal by mistake, the machine will start automatically, and this might lead to
physical injuries.
When handling lubricant, use safety goggle or gloves to prevent the lubricant from coming into
contact with the eyes or skin.
It can cause inflammation. And dont drink the lubricant. It can cause vomiting or diarrhea. Please
keep it out of the reach from children.
Make sure to supply oil when using it for the first time or after not using it for a long time.
9) Oil supply
Oil tank check
Fill the oil tank only to the red maximum line .
(See figure 15)
Hook tank check
Fill the hook tank only to the maximum line. While
using the machine, replenish the oil immediately when
the oil level goes down to the minimum level , back to
the red maximum level .
(See figure 16)
Lubrication
Be sure to supply oil into the oil holes marked red and the oil holes in the friction parts before operating the machine.
(See figure 17)
[Figure 15] [Figure 16]
[Figure 17]

Table of Contents

Related product manuals