5
6.11) Adjustment of Hand Pulley Device
..............................................................................
29
6.12) Assembly and Adjustment of Direct Drive Motor
.......................................................
29
6.13) Setting up the X-Y Origin
.............................................................................................
29
6.14) How to adjust the feeding plate
...................................................................................
30
6.15) Checking the setting position of button clamp
.............................................................
30
6.16) How to set up the button clamp adjusting plate
...........................................................
31
6.17) How to attach the spacer spring plate
...........................................................................
31
6.18) Oil Supply
......................................................................................................................
31
6.19) Cleaning
.........................................................................................................................
34
6.20) Handling of Waste Oil
...................................................................................................
34
7. Cause of Breakdown and Troubleshooting
........................................................
35
8. Pattern List
.........................................................................................................................
37
9. Drawing of Table
..............................................................................................................
38
10. GAUGE LIST
....................................................................................................................
39
11. OPTION LIST
...................................................................................................................
39
To Next Page
Loading...
Need help?
General
