To Next Page

To Previous Page

Fixing Screw

Motor Cover

4.5) Accessory Installation

4.5.1) Installation of Motor Cover

Attach the motor cover to the rear side of the machine by

using four fixing screws (4EA, small size).

Safety Plate

Face Plate

4.5.2) Installation of Safety Plate

Attach the safety plate to the head.

4.5.3) Installation of Thread Stand

Assemble the thread stand and install it on the table.

Make adjustment to properly locate the thread stand.

To guarantee safety, make sure to install the safety plate before using the machine.

Caution

SunStar SPS/E-BS1202 Series User Manual

Questions and Answers: