SunStar SPS/E-BS1202 Series - Table of Contents

4
Contents
1. Machine Type and Specifications
..............................................................................
6
2. Safety Rules
.........................................................................................................................
7
2.1) Safety Stickers
...................................................................................................................
7
2.2) Machine Delivery
..............................................................................................................
8
2.3) Machine Installation
..........................................................................................................
9
2.4) Machine Operation
............................................................................................................
9
2.5) Repair and Maintenance
..................................................................................................
10
2.6) Devices for safety
............................................................................................................
10
2.7) Location of Safety Labels
................................................................................................
11
3. Assembly
............................................................................................................................
12
3.1) Name of Machine Parts
...................................................................................................
12
4. Machine Installation
.......................................................................................................
13
4.1) Installation Environment
.................................................................................................
13
4.2) Electricity Environment
................................................................................................
13
4.3) Table Installation
.............................................................................................................
13
4.4) Machine Installation
........................................................................................................
14
4.5) Accessory Installation
.....................................................................................................
16
5. Machine Operation
.........................................................................................................
17
5.1) How to supply oil
............................................................................................................
17
5.2) How to grease
..................................................................................................................
17
5.3) Needle
..............................................................................................................................
18
5.4) Thread
..............................................................................................................................
18
5.5) Pedal Operation
...............................................................................................................
20
6. Maintenance
.......................................................................................................................
21
6.1) Adjustment of Needle Bar Height
..................................................................................
21
6.2) Adjustment of Needle and Hook
....................................................................................
21
6.3) Adjustment of Lower Shaft Gear and Oscillating Shaft (BS : Semi-rotary)
.................
22
6.4) Adjustment of Shuttle Upside Spring Position (BS : Semi-rotary)
...............................
23
6.5) How to adjust the ascending range of button clamp
......................................................
23
6.6) How to adjust the button clamp holder tension
..............................................................
24
6.7) Adjusting the parts of thread release
...............................................................................
24
6.8) Adjustment of Wiper-related Parts
.................................................................................
25
6.9) Adjustment of Trimmer-related Parts
.............................................................................
26
6.10) Adjustment of Thread Volume on Bobbin
...................................................................
28