SunStar SWF/C-UH1508-45 - Page 110

7-66
Ex) Setting the needle order as 1-2-10-11-12 and arranging offset between 10 and 11
Press when the embroidery
information loads
==== NEEDLE SELECT ====
[1 ]: 1 / 1
[END] [INSERT] [DEL]
Press “1”numerical key
==== NEEDLE SELECT ====
[1 ]: 1 / 1
[END] [INSERT] [DEL]
Press “2”
==== NEEDLE SELECT ====
[12 ]: 2 / 2
[END] [INSERT] [DEL]
Press and “0”for 10
==== NEEDLE SELECT ====
[12A ]: 3 / 3
[END] [INSERT] [DEL]
Press and to set
offset between 10 and 11
==== NEEDLE SELECT ====
[12Ao ]: 4 / 4
[END] [INSERT] [DEL]
Cursor moves automatically.
10th needle = A
11th needle = B,
12th needle =C,
offset = +