SunStar SWF/C-UH1508-45 User Manual

7-11
7-4) USE OF FUNCTION MENU
7-4-1) In and Out of Designs
When the machine is turned on and the embroidery information loads, press . You will see the following
screen:
The sub menus for design input and output are:
EMB CALL: Calling Design from Memory
Ex) Calling design from memory # 8 (number of stitches: 16850).
Use UP/DOWN keys to move the
cursor to “1. EMB CALL”
Press
size of the memory available will
be displayed
1. EMB CALL: calls the design from memory
2. FDD CALL: reads design from the floppy disk
3. EXTERNAL INPUT: reads design from an outside source
4. EXTERNAL OUTPUT: outputs design from memory
5. DESIGN DELETE: deletes design stored in memory
6. DESIGN COPY: copies designs stored in memory
7. MEMORY INITIAL: deletes all designs stored in memory
1. EMB CALL
2. FDD CALL
3. EXTERNAL INPUT
4. EXTERNAL OUTPUT
1. EMB CALL
2. FDD CALL
3. EXTERNAL INPUT
4. EXTERNAL OUTPUT
MEMORY FREE STITCH
= 120000st, 16/99

SunStar SWF/C-UH1508-45 Specifications

General

Brand	SunStar
Model	SWF/C-UH1508-45
Category	Sewing Machine
Language	English