8-3
8-7) TAPE READER AND COMMUNICATION
8-8) MEMORY
NO.
700 Memory file not found No embroidery data in the memory.
Save the data in memory using
disk or tape.
701 System memory insufficient
Not enough memory space for data
storage.
Delete unnecessary data.
ERROR MESSAGE
ERROR
CORRECTION
702 Memory room full Memory is full.
Delete unnecessary data..
703 Memory system error
Error during copying/deletion in
memory.
Reset or turn the power OFF and
ON again.
704 Weakness of battery in memory
Memory saving battery is worn out
during power off.
Contact the nearest SWF dealer
and replace it.
8-9) SYSTEM INSTALLATION
NO.
800 System file not found
Disk for system installation was
not used.
Use the disk for system installation.
ERROR MESSAGE ERROR CORRECTION
NO.
630 Read data error
Error in data read from the tape
reader.
Re-input the data through the tape
reader.
640 Network system not found! Network device is not connected. Check the network connection.
ERROR MESSAGE ERROR CORRECTION
To Next Page
Loading...
Need help?
General
