7-52
■■
POWER RESUME
In case the frame was moved during blackout, this function moves the frame back to the previous position before
the blackout.
The above three functions are about automatic movement of frame. If you press STOP during the frame
movement, the frame will stop, in which case you can either move the frame to the desired location using the
frame movement key or press START to resume the frame movement.
A) Start point of embroidery
B) Stop point of embroidery
C) Frame moved by POWER RESUME
A) Start point of automatic frame movement
B) Emergency stop by the bar switch (turning the switch
to left)
C) Frame moved by frame movement key
D) Frame movement resumed by the bar switch (turning
the switch to right)
E) Path the frame would have been taken automatically
without emergency stop
To Next Page
Loading...
Need help?
General
