7-54
(2) Moving Frame Before Embroidery Begins
Press while the embroidery information is displayed on the menu screen.
When the cursor is in “A/BSTART POINT”, press . Then the following screen appears.
Enter the value within the range and press .
Selecting Polyester Thread Mode
When all the values of “A/BSTART POINT” are set higher than 30, the polyester thread mode is chosen. This
could prevent looping from occurring during embroidery.
1. ASTART POINT : O
2. BSTART POINT : O
: A-START POINT :
: RANGE : -10
↔↔
40 :
O
To Next Page
Loading...
Need help?
General
