Operation
40 NT 10000...NT 12000
Customer area The customer password must be entered to access this area. All settings can be
made which are required for installation and commissioning of the Solar Inver-
ter.
NOTE
The password for the customer area is:
********
The password is preset and is directly confirmed with .
As an option you can assign a personal password in the Commissioning menu.
Only digits between 0 – 9 and letters between a – z and
A – Z are permitted.
The password always has 8 characters. If the password you entered has less than
8 characters, the remaining characters are filled with *.
Example:
Your password is "Solar". This password has 5 characters. The system automati-
cally appends three *, so that the password becomes "Solar***".
Installer area In this section the installer can make special settings on the Solar Inverter which
are only possible after consulting the Technical Hotline. Request a device-speci-
fic password from the Technical Hotline.
Technical hotline +49 (0) 7531 996 77-577
Country password Changing the country setting after commissioning requires an installer pass-
word, which can be obtained from the Technical Hotline. The last 8 digits of the
installer password form the country password.
NOTE
Each country has specific regulations for grid connection of inverters. By selec-
ting the country the settings for the switch-off parameters are set according to
the standards for this country.
Menu structure You can access all screens on the Solar Inverter with the menu. The menu is ope-
ned by pressing the left arrow key from the standard screen.
To Next Page
Loading...
