EasyManua.ls Logo

Supermicro A2SDV-8C-TLN5F - Processor Overview; Special Features; Recovery from AC Power Loss; System Health Monitoring

Supermicro A2SDV-8C-TLN5F
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Chapter 1: Introduction
1.2 Processor Overview
The Intel Atom C3000 series processor, with 16 cores and up to 31W of power, offers
performance, reliability, and high intelligence. As a low-power system-on-a-chip motherboard,
the A2SDV-8C/-12C+/-16C-TLN5F is optimized for a variety of workloads that include
networking and cloud storage.
ACPI Power Management Logic Support Rev. 4.0a
Intel QuickAssist Technology
Adaptive Thermal Management/Monitoring
PCI-E 3.0, SATA 3.0 and M.2 (B-Key and M-Key) connectors
System Management Bus (SMBus) Specication Version 2.0
Intel VT-x with Extended Page Tables (EPT)
Intel Virtualization Technology (VT-x)
Intel Virtualization Technology for Directed I/O (Intel VT-d)
1.3 Special Features
This section describes the health monitoring features of the A2SDV-8C/-12C+/-16C-TLN5F
motherboard. The motherboard has an onboard System Hardware Monitor chip that supports
system health monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
1.4 System Health Monitoring
This section describes the health monitoring features of the A2SDV-TLN5F Series
motherboard. The motherboard has an onboard Baseboard Management Controller (BMC)
chip that supports system health monitoring. Once a voltage becomes unstable, a warning
is given or an error message is sent to the screen.

Table of Contents

Related product manuals