32
A2SDV-8C/-12C+/-16C-TLN5F User's Manual
1
2
1. PWR Button
2. Reset Button
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be congured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power when the system
is in suspend mode, press the button for 4 seconds or longer. Refer to the table below for
pin denitions.
Power Button
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 Ground
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case. Refer the table below for pin denitions.
Reset Button
Pin Denitions (JF1)
Pin# Denition
3 Reset
4 Ground
Power Button
OH/Fan Fail LED
LAN2 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
2.5V Stby
Ground
2.5V Stby
Ground
LAN3 Active LED
Power Fail LED
UID
3.3V
NMI
3.3V
X
X
1 2
19 20
3.3V