Supermicro A2SDV-8C-TLN5F

To Next Page

To Previous Page

A2SDV-8C/-12C+/-16C-TLN5F User's Manual

iSCSI Conguration

iSCSI Initiator Name

This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.

Once the name of the iSCSI Initiator is entered into the system, congure the proper settings

for the following items.

Add an Attempt

Delete Attempts

Change Attempt Order

Intel® I210 Gigabit Network Connection - 00:25:90:5E:AD:A8

Intel® Ethernet Connection X553/X557-AT 10GBASE-T - 00:25...

These features display the following information :

NIC Conguration

Link Speed

Use this feature to change the link speed and duplex for the current port. The options are

Auto Negotiated, 10Mbps Half, 10Mbps Full, 100Mbps Half, and 100Mbps full.

Wake On LAN

Select enabled to wake the system with a magic packet. The options are Enabled and

Disabled.

Blink LEDs

This feature allows the user to specify the duration for LEDs to blink. The range is from 0 ~

15 seconds. The default setting is 0.

UEFI Driver

This item displays the UEFI driver version.

Adapter PBA

This item displays the Processor Bus Adapter (PBA) model number. The PBA number is a

nine digit number (i.e., 010B00-000) located near the serial number.

Supermicro A2SDV-8C-TLN5F - Page 84