18
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JUID1 Switch function UID / Reset Pins 1-2 (UID)
JPG1 VGA Enable / Disable Pins 1-2 (Enable)
LED Description Status
LED4 Power LED Solid Green: Power On
LED1 BMC Heartbeat LED
Green: Blinking (BMC Normal)
Green: Fast Blinking (BMC Initializing)
Connector Description
JNCSI1 NCSI Connector
JPWR1-11 12 V 8-Pin GPU / BPN / AOC Power Connector
BT1 Onboard Battery
JTPM1 TPM (Trusted Platform Module) / Port 80
FAN1-FAN7 Hot-swappable system fan
FAN8 4-pin system fan header
FAN9 Active CPU heatsink fan header
JAIOM1 Supermicro® Advanced I/O Module (AIOM PCIe 5.0 x16) Slot
JFP1, JFP2 Front Control Panel Headers 1 and 2
JUSB2 USB 3.0 header
NVMe 0/1 PCIe1A / SATA0-7
NVMe 2/3 PCIe1B / SATA8-15
NVMe 16/17 PCIe5B / SATA24-31
NVMe 18/19 PCIe5A / SATA16-23
NVMe 4/5-14/15 PCIe2B / PCIe2A / PCIe3B / PCIe3A / PCIe4B / PCIe4A
PSU1/PSU2 Motherboard Main Power Supply Connector
JIO1 Front BMC and Onboard VGA / USB / LAN Module Connector
JSXB0-1 Slot1-2 PCIe 5.0 x16
J7 M.2-C1 PCIe Gen 4 x4 / M.2-C2 PCIe Gen 4 x2
Note: Jumpers, connectors, switches, and LED indicators that are not described in the
preceding tables are for manufacture testing purposes only, and are not covered in this
manual.
To Next Page
Loading...
