24
Chapter 2: Server Installation
Installing the Inner Rails
Begin the rack mounting procedure by installing the inner rails to the chassis.
1. Identify the left and right inner rails. They are labeled.
2. Place the inner rail rmly against the side of the chassis, aligning the hooks on the side
of the chassis with the holes in the inner rail.
3. Slide the inner rail forward toward the front of the chassis and under the hooks until the
quick release bracket snaps into place, securing the rail to the chassis.
4. Optionally, you can further secure the inner rail to the chassis with a screw.
Figure 2-3. Installing the Rails
Warning: Do not pick up the chassis with the front handles. They are designed to pull
the system from a rack only.
To Next Page
Loading...
