4-38
Supermicro C7Z270-CG Motherboard User’s Manual
Graphics Turbo IMON Current
Use this feature to set the limit on the current voltage regulator. Valid
range is 14-31. Default is 31.
Skip Scanning of External Gfx Card
Use this feature to scan for External Gfx Card on PEG and PCH PCIE Ports.
If this feature is enabled, the system will not scan for a new card. The
options are Disabled or Enabled.
Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
GMM Device (B0:D8:F0)
This feature will enable/disable the SA GMM device. The options are
Enabled and Disabled.
X2APIC Opt Out
This feature will enable/disable the X2APIC_OPT_OUT bit. The options
are Enabled and Disabled.
Graphics Configuration
To Next Page
Loading...
