Supermicro C7Z270-CG - Boot Override; Launch EFI Shell from Filesystem Device

4-62
Supermicro C7Z270-CG Motherboard User’s Manual
Boot Override
Saves the specied boot override and resets the system, i.e., IBA CL
Slot 00FE v0110. Select OK to activate, otherwise, click Cancel.
Launch EFI Shell from lesystem device
This option will attempt to launch the EFI Shell application (shell.e)
from one of the available le system devices. Select OK to activate,
otherwise, click Cancel.
For the following options, select OK to initiate, otherwise, click Cancel.
Save Options
Save Changes and Reset
This option will save the changes that have been made and will reboot
the system.
Discard Changes and Reset
This option will save the changes that have been made and will reboot
the system.
Save Changes
This option will save the changes but will remain in setup mode.
Discard Changes
This option will discard the changes but will remain in setup mode.
Save Prole 1, Save Prole 2
This option will save the current overclocking prole into either Prole 1
or Prole 2 location. Click OK to save the prole, otherwise, click Cancel.
Load Prole 1, Load Prole 2
This option will load a previously saved overclocking prole from either
Prole 1 or Prole 2 location. Click OK to load the prole, otherwise,
click Cancel.
Default Options
Restore Defaults
This option will load the factory-stored optimized defaults and remain
in setup mode.