Supermicro C7Z270-CG - F-2 Installing the Windows 10 OS

Appendix F: M.2/U.2 RAID Conguration
F-5
F-2 Installing the Windows® 10 OS
Follow the steps below to install the Windows® 10 OS with M.2/U.2
NVMe RAID devices.
Note: Be sure to have both UEFI USB boot thumb drives (one with
the Windows® 10 OS image and the other with the Intel® RST
driver) connected to the system before the rebooting.
1. Power on (reboot) the system.
2. Press <F11> key to enter the boot menu and select the one that contains the
Windows® 10 OS image as the boot device.
3. Follow the prompts to load and install the RST driver.