Supermicro C7Z270-CG - SATA Frozen; Serial ATA Port; Hot Plug; Configured as Esata

Chapter 4: AMI BIOS
4-49
SATA Frozen
Select Disabled to disable the Freeze Lock Security feature. The settings
are Disabled and Enabled.
The remaining options in the section are similar across Serial ATA
Ports 0 through 5.
Serial ATA Port
This item displays the detected SATA drive, if any.
Hot Plug
This feature designates the port specied for hot plugging. Set this item
to Enabled for hot-plugging support, which will allow the user to replace
a SATA disk drive without shutting down the system. The options are
Disabled and Enabled.
Congured as eSATA
This item displays the eSATA status for the detected hard drive.
Spin Up Device
When this option is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The settings are Disabled and Enabled.
SATA Device Type
Use this feature to identify the type of HDD that is connected to the
STATA port. The options are Hard Disk Drive and Solid State Drive.