Supermicro C7Z270-CG - Page 135

Chapter 4: AMI BIOS
4-65
5. Select the lename (i.e., "C7Z270-CG") in the pop-up menu.
6. Select "Start Flash" to ash the BIOS. A pop-up message will ap-
pear to show the progress of the BIOS ash.
7. If the ash is successful, a pop-up message will indicate the result.
Select "OK" to complete the BIOS ash and to reboot the system.
Go to the "SYSTEM INFORMATION - Motherboard" page in the BIOS
Setup to check for the correct BIOS version.