Supermicro C7Z270-CG - Page 152

F-2
Supermicro C7Z270-CG Motherboard User’s Manual
5. On the main screen, select Advanced > PCIe/PCI/PnP Conguration.
6. Set the item, Storage Option ROM/UEFI Driver, to [EFI].
4. Set two items, PCIe Storage Dev On Port XX, to [RST Controlled].
Note: The two items in the red box, as shown below, will be dis-
played when M.2/U.2 devices are detected by the system.
7. On the main screen, select Save & Exit. Set the item, Boot mode select, to
[DUAL]