Supermicro C7Z270-CG - Page 84

4-14
Supermicro C7Z270-CG Motherboard User’s Manual
IMON Prex
This feature sets the IMON offset value to a positive or negative num-
ber. The options are + and -.
VR Current Limit
This feature sets the Voltage Regulator current limit. The value repre-
sents the maximum instantaneous current allowed at any given time.
The value is represented in 1/4A (Ampere) increments. A value of 400
equals 100A. Set this number to 0 for Auto. This uses the BIOS VR
mailbox command 0x6.
VR Voltage Limit
This feature sets the Voltage Regulator voltage limit. The value is
represented in mV. A value of 1250 equals 1.25V. Set this number to
0 for Auto. This uses the BIOS VR mailbox command 0x6.
TDC Enable
Enable or Disables TDC (Thermal Design Current). The options are
Disabled and Enabled.
TDC Current Limit
The TDC Current Limit is dened in 1/8A (Amperes) increments and
uses the BIOS mailbox command 0x1A. A value of 1000 equals 125A.
Valid range is 0-32767. Enter 0 for 0 Amps.
TDC Time Window
The TDC Time Window is dened in milliseconds. Valid range is 1-8ms
and 10ms. Note that 9ms has no valid encoding in the MSR deni-
tion. The options are 1ms, 2ms, 3ms, 4ms, 5ms, 6ms, 7ms, 8ms,
and 10ms.
TDC Lock
Use this feature to enable or disable TDC Lock. The options are Dis-
abled and Enabled.