Supermicro C7Z87 - PCH-FW Configuration; Firmware Update Configuration

Chapter 4: AMI BIOS
4-27
Offset Prex
Use this feature to set the Offset value as a positive (+) number or a nega-
tive (-) number. Press "+" or "-" on your keyboard to make a selection. The
default setting is "+".
IOD Voltage Offset (mV)
Use this feature to set the IOD Voltage Offset value between -1000mV and
998mV. Enter 0 to use the default setting.
Offset Prex
Use this feature to set the Offset value as a positive (+) number or a nega-
tive (-) number. Press "+" or "-" on your keyboard to make a selection. The
default setting is "+".

PCH-FW Conguration
The following information are displayed:
•ME FW Version
•ME Firmware Mode
•ME Firmware Type
•ME Firmware SKU
•PTT Capability/State

Firmware Update Conguration
ME FW Image Re-Flash
Select Enabled to re-ash the ME (Management Engine) Firmware. The options
are Disabled and Enabled.