Supermicro C7Z87 - 4-4 Boot Settings; Set Boot Priority

4-30
C7Z87 User’s Manual
4-4 Boot Settings
Use this feature to congure Boot Settings:
Set Boot Priority
This option prioritizes the order of bootable devices that the system to boot from.
Press [ENTER] on each entry from top to bottom to select devices.
•1st Boot Device
•2nd Boot Device
•3rd Boot Device
•4th Boot Device
•5th Boot Device
•6th Boot Device

Hard Disk Drive BBS Priorities
•1st Device
•2nd Device

UEFI Boot Drive BBS Priorities
•1st Boot Device

Delete Boot Option
Use this feature to remove a pre-dened boot device from which the system will
boot during startup. The settings are [any pre-dened boot device]
Main Advanced SecurityBoot Exit
 : Select Screen
 : Select Item
Enter: Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit
Sets the system boot order
Set Boot Priority
1st Boot Device [CD/DVD]
2nd Boot Device [Hard Disk]
3rd Boot Device [USB Hard Disk]
4th Boot Device [Removal]
5th Boot Device [Network: IBA GE Slot 00C8 v1410]
6th Boot Device [UEFI: Built-in EFI ]
Hard Disk Drive BBS Priorities
UEFI Boot Drive BBS Priorities
 Delete Boot Option
 Delete Driver Option
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.