5-5
Chapter 5: Chassis Setup and Maintenance
The drives are mounted in drive carriers to simplify their installation and removal
bays.
Figure 5-3. Chassis Drive Carrier
Installing a Hard Drive to the Hard Drive Carrier
1. Remove the screws securing the dummy drive to the carrier.
2. Remove the dummy drive from the carrier.
Warning: Except for short periods of time (swapping hard drives), do not operate
the server with the hard drives removed from the bays.
Figure 5-4. Removing Dummy Drive from Carrier
Drive Carrier
Dummy Drive
1
1
1
1
To Next Page
Loading...
