Supermicro SC847 JBOD - Page 101

D-5
Appendix D: BPN-SAS3-847EL Backplane Specications
12. - 13. JTAG Connectors
The Primary JTAG connector is designated
P_JTAG (J25). The secondary JTAG connec-
tor is designated S_JTAG (J35) and is not
present on BPN-SAS3-847EL1 backplanes.
These are connectors for the manufacturer's
test purposes only.
14. - 15. ICE Connectors
The Primary ICE connector is designated
P_ICE (J26). The secondary ICE connector
is designated S_ICE (J35) and is not present
on BPN-SAS3-847EL1 backplanes. These
are connectors for the manufacturer's test
purposes only.
11. SMB Connector
The SMB connector. is designated SMB (J28).