SC847 JBOD Chassis Manual
1-2
1-3 Components
The SC847 JBOD 4U high-performance chassis includes the following features:
Drives
The chassis supports forty-four hot-swap 3.5" SAS or SATA hard disk drives, 24 in
the front and 20 in the rear. The drives are supported by two backplanes.
Power Supply
The chassis features two redundant digital power supplies, each 1200 watts with a
Cooling
The chassis includes seven mid-chassis, hot-plug 80 mm heavy-duty, hot-swap
fans. System fans are powered and controlled by the BMC using 4-pin connectors.
Control Board
The JBOD control board allows the user to remotely control and monitor the chassis
reading temperature data from the backplane.
Mounting Rails
Rack mount rails allow you to mount the chassis in a rack. The rails feature snap-in
installation and quick release, and support modern square hole racks. Round hole
rack are supported with a conversion kit.
1-4 Where to get Replacement Components
If you need replacement parts for your system, to ensure the highest level
of professional service and technical support, purchase exclusively from our
Supermicro Authorized Distributors/System Integrators/Resellers. A list can be found
at: http://www.supermicro.com. Click the "Where to Buy" link.
To Next Page
Loading...
