6-8
SC847 JBOD Chassis Manual
6-6 BMC
The control board provides remote access, monitoring and management through
the baseboard management controller (BMC) and other management controllers
are related to BMC. For general documentation and information on BMC, visit our
website at:
www.supermicro.com/en/solutions/management-software/bmc-resources
BMC ADMIN User Password
For security, each system is assigned a unique default BMC password for the ADMIN
user. This can be found on a sticker on the chassis and a sticker on the control
board. The sticker also displays the BMC MAC address.
Figure 6-5. BMC Password Label
IP Address
assigned to this system from the DHCP server. (See below for an additional method
to identify the assigned IP address.) This allows you to log in to the BMC.
Note
Press and hold the UID/reset button on the front Control panel for 6-8 seconds to
change to static IP mode with the default IP address as shown below. Return the
BMC default IP: 192.168.1.99
User name: ADMIN
Password: Unique password, as noted on sticker (details above)
To Next Page
Loading...
