Supermicro SC847 JBOD - Page 73

6-9
Chapter 6: CB3 JBOD Control Board
Finding BMC IP Address Using SAS In-band (Linux)

1. Identify the JBOD enclosure name, for example /dev/sg4.
2. Use the vpd command to view the IP address.
[root@hdmaster user]# sg_vpd -p 0x85 /dev/sg4
Management network addresses VPD page:
 Targetdevicethatcontainsaddressedlu,Servicetype:unspecied
172.31.40.150
[root@hdmaster user]#