6-1
Chapter 6: CB3 JBOD Control Board
Chapter 6
CSE-PTJBOD-CB3 Control Board
6-1 Overview
The CSE-PTJBOD-CB3 model JBOD control board allows the user to remotely
control and monitor the chassis resources using the BMC, such as powering on or
been designed to utilize the most up-to-date technology available, providing your
system with reliable, high-quality performance.
release available at the time of publication. Refer to the Supermicro web site
at www.supermicro.com for the latest updates, compatible parts and supported
6-2 Safety Guidelines
ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent
damage to your system, it is important to handle it very carefully. The following
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing a component from the antistatic
bag.
• Handle the control board by its edges only; do not touch its components,
peripheral chips, memory modules or gold contacts.
• When handling chips or modules, avoid touching their pins.
• Put the control board and peripherals back into their antistatic bags when not
in use.
To Next Page
Loading...
