4-7
Chapter 4: Chassis Setup and Maintenance
4-4 Removing the Chassis Cover
Figure 4-6. Removing the Chassis Cover
Release Tab
Remove this screw
(if necessary)
Removing the Chassis Cover
1. Power down the system and remove the power cords from the back of the
power supplies.
2. Press the release tabs to remove the cover from the locked position. Press both
tabs at the same time.
3. Once the top cover is released from the locked position, slide the cover toward
the rear of the chassis.
4.
Caution: Except for short periods of time, do not operate the server without the
2
2
3
4
To Next Page
Loading...
